Temperature control is now available via software so this is is the last batch of the temperature controllers.

The aftermarket plastic available for 3D printing tends to extrude better at lower temperatures.

The UP! Plus and UP! Plus 2 printers do not allow you to control the extrude temperature, so I designed this removable plug-and-play module to allow you to set the temperature manually.

I have had reports of the unit working on the UP! Mini and UP! Box, however I do not have either of those machines so can not directly support any installation questions.

The offset is programmable from -70 to +30 Degrees C. That is 200 to 300 in ABS mode and 130 to 230 in PLA mode.
There is a 128x64 OLED display that shows the current and target temperatures, the mode and a graph of the previous 5 minutes.

Please download the casing model from here (v3.02): casing-oled-3.02.stl
The old casing is here (v3.00): casing-oled.stl

Latest User Manual.

There are at least two versions of the UP+, the original one with a 14-pin header and a later one with a 16-pin header on the extruder.
Please be sure to order the correct version for your machine.
If you are unsure, please take a photo of the extruder PCB and e-mail me.

v3.0.2 is now shipping, which has a slightly different layout and a better integrated OLED screen (see photos 1 and 2).

Write a review

Please login or register to review

PP3DP UP! Plus Temperature Control (OLED)

  • Product Code: UpMod3-OLED
  • Availability: 2 - 3 Days
  • £79.99

Available Options